Think it is difficult printing with the Anet A8 and TPU? Read this article to the end to find out my hints and tips Ok so you have bought an Anet A8 3d printer. You have downloaded some models from Thingiverse or other sites. These have been hit or miss, but more hit than miss….
This article is how to find out whether your Anet A8 hotend has been assembled correctly. Common Problems with the Anet A8 hotend There are three main problems associated with the hotend which will be dealt with in this article. Filament leaking from the top of the heat block Filament leaking from the bottom of…
Having had my anet a8 for over a year now I am getting quite used to it. I am just going through a mod for adding an e3d v6 all metal hotend clone, with interesting results, but that’s another story. One of the main things I with my anet a8 at the start was bed…
3d print journal 01-12-17 : bed screws binding A tale of woe about the dilema to drill out the base bed screw threads or not, and what a lucky chap I am, how I overcame the problem and what you should do if you haven’t got to this stage yet. And how I initially level…
The Anet A8 is a cost effective introductory printer into the 3d printing world. As a build it yourself model, it is up to you how you modify it. The standard build is good and will teach you a lot about 3d printing. But it can be improved on easily and cheaply. Philrestoreb3dp.stan-tech.com
